Table of Contents
Previous Page
9
18974 (736)
Singer No. 20-2
To Use the Cloth Guide
To guide the work accurately when sewing
close to the edge of the goods, the cloth
guide (H, Fig. 2) should be used. Fasten the
cloth guide to the cloth plate of the machine
by means of the clamping thumb screw (J,
Fig. 2), inserting the thumb screw into the
screw hole in the cloth plate. The cloth guide
can be adjusted to bring the edge of the
goods as close to the line of stitching as
desired. If desired, the cloth guide can be
removed from the machine.
To Oil the Machine
The machine should be oiled occasionally
with the sewing machine oil especially pre-
pare by the Singer Sewing Machine
Company. This oil can be purchased from
any Singer shop or Singer salesman. Apply
one drop of oil at each of the places where a
part of the machine moves against another
part.
About every six months, put a drop or two of
CAUTION
Do not run the machine or motor except
when sewing.
When the machine is not in use, always
remove the plug from the electric outlet or
light socket.
Further Instructions
for the use of this machine or any other
Singer Machine, will be cheerfully given at
your local Singer Shop.
