Table of Contents
Previous Page | Next Page
7
18974 (736)
Singer No. 20-2
To Remove the Work
Sew two stitches past the end of the seam
and stop the machine with the needle bar at
its highest point, then with the left hand draw
a finger length of thread to the left through
the hole near the upper end of the needle bar
as shown in Fig. 5. With the right hand,
using a pair of scissors, draw the slack thread
to the right through the eye of the needle, as
shown in Fig. 6, then pull the thread upward
from the work, the presser foot being down,
and cut the thread close to the goods, as
shown in Fig. 7. Raise the presser foot, pull
the work from you and the end of the thread
will be draw through the loop, as shown in
Fig. 8.
FIG. 5. DRAWING THE THREAD THROUGH THE
NEEDLE BAR
FIG. 6. DRAWING THREAD THROUGH THE NEEDLE
FIG. 7. CUTTING THE THREAD CLOSE
TO THE GOODS
