Port on your Modem or Router.
5.
Make sure that the Data LED light on each HomePlug AV Ethernet Bridge turns solid green.
6.
Your HomePlug AV Ethernet Bridges are now connected forming a HomePlug AV network.
2
Individual HomePlug AV Network Setup (Optional)
All HomePlug AV Ethernet Bridges ship with a default security key so they will automatically link to all other HomePlug AV
Ethernet Bridges sharing the same electrical lines. If there are other HomePlug AV Ethernet Bridges in the building (such as in
an office or apartment building), you may want to create your own individual HomePlug AV network group so other
HomePlug AV Ethernet Bridges cannot connect to your network.
This section describes how to use the Security button for configuration in the following situations:
2.1
Creating a new individual HomePlug AV network (Network AB)
Two unassociated Bridges (Bridge A and Bridge B) are forming a new network—Network AB
The procedure is as follows:
1.
Press and hold the Security button on Bridge A for no more than 10 seconds. Must release after 10 seconds. Once re-
leased, the Power light will flash.
The password to Bridge A has just been erased and random security key has been generated. It must now be linked to
your network to adopt the new network security key.
2.
Press and hold the security button on Bridge B for 10 seconds and release it when the Power light flashes. The password
to Bridge B has just been erased and random security key has been generated. It must now be linked to your network to
adopt the new network security key.
3.
Currently, Bridge A and Bridge B are not networked
4.
Press and hold the Security button on Bridge A for 1~3 seconds then release.
5.
The Power light on Bridge A starts to flash.
6.
Within 120 seconds after the Power light on Bridge A starts to flash, press and hold the Security button on Bridge B for
1~3 seconds then release.
7.
Both Bridge A and Bridge B are now networked together.
