PROBLEMS AND SOLUTIONS
No water comes out of the shower head
a) check the correct positioning of the washer
b) check that there is only one washer in the pivot
head
Low water pressure or no jet
a) clean the shower head with vinegar/water
solution (see cleaning instructions)
b) clean the filter
c) water pressure less than 20 psi
Leakage at connection between hose and pin head
a) check that only one washer is positioned above
the filter
Cleanliness
Use only soft cloths and hot water and soap
Do not use aggressive, corrosive or abrasive detergents
To ensure good performance clean the water filter regularly
To access the filter you need to remove the shower head from the tube
Rinse the filter under running water for a few minutes until it is cleaned of all impurities
You can use a tenti toothbrush to gently remove any mineral deposits
Reposition the filter and reinstall the shower head.
Guarantee
SINED products have a 2-year warranty from the date of purchase for defects in materials and
workmanship.
Components subject to wear are excluded from the warranty
Damage due to incorrect assembly, improper use and incorrect maintenance (e.g. use of
inappropriate detergents) is not covered by the warranty.
Damages deriving from the use of non-original spare parts are not covered by the warranty.
Any damage resulting from interventions not performed by specialized technicians is not
covered by the warranty.
Damage due to frost, limescale or other impurities inside the shower is not covered by the
warranty.
In the presence of problems covered by warranty, the product must be returned to the seller.
The product must be carefully packaged and complete with all its parts and accessories;
The reason for the return must be described in detail and proof of purchase (invoice or
receipt) must be provided;
The shipping costs of the return are charged to the buyer;
The returned product will be checked at the
seller's
premises and repaired or replaced at
the sole discretion of the seller.
