IMPORTANT INFORMATION
Please read the operating instructions carefully before installing and using the infrared heater.
This user manual contains important information about your safety, as well as recommendations for proper
use and maintenance.
Keep the operating manual together with the warranty certificate, the sales receipt and, if possible, the
cardboard packaging and packing material.
The infrared lamp you have purchased may be somehow different from the one described in the manual, but
this does not affect how it is used and how it works.
Important precautions and instructions provided in this owner's guide do not include all possible ways and
situations you may encounter. You must understand that common sense, prudence and care are factors that
cannot be "built into" any product.
SAFETY INSTRUCTIONS
•
Read the instructions before installation and use.
Certain precautions must be observed when using the
infrared heater. Improper operation without observing the precautions may cause damage to the health of
the user and other persons as well as damage to their property.
•
Installation and electrical connection must be performed by a qualified electrician.
•
Use only the voltage indicated on the heater nameplate.
•
Connect the unit only to a properly installed power outlet with ground contact.
•
The heater must be connected to the power supply with a2-pole circuit breaker.
•
It is strongly recommended to use a 30mA differential switch.
•
The unit must be handled with care and avoid vibration or shock.
•
Do not use the device in areas where gasoline, paint, or other flammable liquids are used or stored.
•
Do not use the apparatus in areas where there is a particular risk of explosion.
•
Do not use the unit in a construction site, greenhouse, barn, or stable where there is flammable dust.
•
Do not use the unit as a sauna heater.
•
Do not use this unit where animals reproduce or grow.
•
WARNING
: To avoid burns, do not touch the surface of the unit with your hands or other body parts.
•
Do not place any clothing, towels or the like on top of the heater to dry. Risk of overheating and fire
•
Do not leave the heater unattended during use.
•
Do not use this heater on a wet surface, or where it may fall or be pushed into water.
•
Do not touch a device that has fallen into water. Turn off the power and unplug immediately.
•
If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons to avoid danger.
•
If the heater is defective, it must be checked and repaired by the manufacturer, its service agent or similarly
qualified persons to avoid danger.
•
CAUTION:
The heater must not be used if the glass panels are damaged.
•
Do not use the device with wet hands.
•
Use this unit only as described in this manual. Any other use is not recommended by the manufacturer and
may cause fire, electric shock, or injury.
•
Do not use abrasive cleaning products on this device. Clean with a damp (not wet) cloth rinsed only with warm
water and soap. Always remove the power plug from the mains before cleaning.
•
The heater must be installed at least 2.2 m above the floor when the heater is wall-mounted.
•
The heater must not be immediately under an electrical outlet. The power outlet must not be located on the
back of the heater. They should be located outside the physical footprint of the units to minimize heat buildup
Summary of Contents for CALDO-IRA-INOX-2000
Page 5: ......