SINED CALDO-IRA-INOX-2000, Manual, Page: 11 / 12


CAUTION: There is a built-in safety feature that will automatically activate the heater to go into standby
mode after eight hours of continuous operation if the timer is not activated.
At this point the "- -" symbol will flash to indicate that the unit is in standby mode.
4. 4. Cleaning:

Disconnect the unit from the power supply;

After the unit has cooled down, the case can be dried;

Do not touch the bulb element with your fingers as this contact may cause stains.

The reflector should be cleaned regularly by professionals.

Do not use abrasive or caustic cleaners!

Never immerse the device in water! Danger of death!
5. 5. Maintenance
Any maintenance or repair, including replacement of the bulb element, should only be performed by a
qualified electrician.
Wiring diagram
Proper disposal of this product
This mark indicates that this product should not be disposed of with other household
waste throughout the EU. To avoid possible harm to the environment or human health
from uncontrolled waste disposal, recycle waste responsibly to promote the sustainable
reuse of material resources. To return your used device, use the return and collection
systems or contact the dealer where you purchased the product. They may take this
product for environmentally safe recycling.
Batteries must be disposed of in accordance with current regulations.
Production: FOSHAN CITY SHUNDE DISTRICT WARMTEK ELECTRICAL CO., LTD.