Sindoh D310 Series, User Manual, Page: 48 / 324

[Web Management Tool] 5-5
5.3 Using this Machine in a Wireless Network Environment 5
5.3 Using this Machine in a Wireless Network Environment
Overview
To use this machine by connecting it to a wireless network environment, follow the below procedure to con-
figure the settings.
0
The optional Wireless LAN Interface Kit is required to use this function.
1
Selecting a network interface configuration.
%
For details on configuring the setting, refer to page 5-5.
2
Configure a setting to connect this machine to the extended network using TCP/IP.
% For details on configuring the setting, refer to page 5-5.
3
Configuring a setting to operate this machine as a wireless LAN adapter or wireless LAN access point.
% For details on configuring a setting to operate this machine as a wireless LAN adapter, refer to
page 5-6.
% For details on configuring a setting to operate this machine as a wireless LAN access point, refer to
page 5-8.
% For details on configuring a setting to operate this machine as a Wi-Fi Direct group owner, refer to
page 5-9.
Setting a network interface configuration
Set a network interface configuration of this machine.
Select [Network] - [Network I/F Configuration] in the administrator mode, then select a target network inter-
face.
-
[Wired Only]: Select this option to only use this machine in the wired LAN environment.
- [Wireless Only]: Select this option to only use this machine in the wireless LAN environment. This ma-
chine runs as a wireless LAN adapter in the wireless LAN environment.
- [Wired + Wireless (Secondary Mode)]: Select this option to use this machine in both the wired LAN en-
vironment and wireless LAN environment. This machine runs as a wireless LAN adapter in the wireless
LAN environment.
- [Wired + Wireless (Primary Mode)]: Select this option to use this machine in both the wired LAN envi-
ronment and wireless LAN environment. This machine runs as a wireless LAN access point in the wire-
less LAN environment.
-
[Wired + Wireless (Wi-Fi Direct)]: Select this option to use this machine in both the wired LAN environ-
ment and wireless LAN environment. This machine runs as a Wi-Fi Direct group owner in the wireless
LAN environment.
Configuring the basic settings for TCP/IP
Configure a setting to connect this machine to the wireless network using TCP/IP.
Set this option when [Wired + Wireless (Secondary Mode)], [Wired + Wireless (Primary Mode)], or [Wired +
Wireless (Wi-Fi Direct)] is selected in [Network] - [Network I/F Configuration] in the administrator mode.
In the administrator mode, select [Network] - [TCP/IP Setting] - [Wireless Setting], then click [OK]. In [TCP/IP
Setting (Wireless Setting)], configure the following settings.
Settings Description
[IPv4] Configure an IPv4 setting when connecting this machine to the wireless network
using IPv4.