Sindoh D310 Series, User Manual, Page: 49 / 324

5.3 Using this Machine in a Wireless Network Environment 5
[Web Management Tool] 5-6
Tips
-
For the wireless network address, specify a private IP address or other address that is different from
the wired network address. If the same network address group is specified, it will disable a transmission
from this machine to the wired network.
Configuring a setting to operate this machine as a wireless LAN adapter
Configure a setting to operate this machine as a wireless LAN adapter and connect to your access point.
Set this option when [Wireless Only] or [Wired + Wireless (Secondary Mode)] is selected in [Network] - [Net-
work I/F Configuration] in the administrator mode.
1
In the administrator mode, select [Network] - [Wireless Network Setting] - [Wireless LAN Adapter], then
specify the setting method.
[IP Ad-
dress
Setting
Method] To manually enter the IP address, select [Manual Setting], then enter the IP ad-
dress and subnet mask of this machine to be used on the wireless network .
To automatically obtain the IP address from the DHCP server, select [Auto Set-
ting] .
This setting is only available using Manual Setting when [Wired + Wireless (Pri-
mary Mode)] or [Wired + Wireless (Wi-Fi Direct)] is selected in [Network I/F Con-
figuration].
[Auto Setting] is specified by default.
[IP Ad-
dress] If you select [Manual Setting] for [IP Address Setting Method], enter the fixed IP
address assigned to the machine.
[Subnet
Mask] If you select [Manual Setting] for [IP Address Setting Method], enter the subnet
mask.
[IPv6] Configure an IPv6 setting when connecting this machine to the wireless network
using IPv6.
[Link-Lo-
cal Ad-
dress] Displays the link-local address.
The link-local address is automatically specified from the MAC address of this
machine.
Settings Description
[Direct Input] Select this option to directly enter all the setting items such as SSID and the
encryption scheme that are required for a connection.
[WPS] Select this option to automatically obtain information required for a connection
from the access point.
The access point must support the WPS function.
When
Web Connection is used by specifying the IP address of this machine
connected to the wireless network, Web Connection is disconnected if WPS
is executed.
Settings Description