Sindoh 3DWOX-1, User Manual, Page: 107 / 120

5
-5
Maintenance
5
Message Description What To Do
Notification 422
Remove cartridge. Is there
any remaining filaments in
the tube or on the entrance
of filament insertion (front of
printer)? Occurs when filament does not
come out during UNLOAD. Follow the on-screen instructions and
remove cartridge, and any filament
residue.
Notification (408)
Model has exceeded the
minimum print range of the
"X" axis.
Notification (408)
Model has exceeded the
minimum print range of the
"Y" axis.
Notification (408)
Model has exceeded the
minimum print range of the
"Z" axis. The printing job has exceeded the
minimum printable range. Press the [OK] button, and the pop up
message will disappear.
Notification (408)
Model has exceeded the
maximum print range of the
"X" axis
Notification (408)
Model has exceeded the
maximum print range of the
"Y" axis
Notification (408)
Model has exceeded the
maximum print range of the
"Z" axis The printing job has exceeded the
maximum printable range. Press the [OK] button, and the pop up
message will disappear.
Notification 611
Notification 612 The filament doesn’t enter well for
loading in the OPEN MATERIAL. Cut the tip of the filament and reload it.
Notification 622 The filament doesn’t exit well for
unloading in the OPEN
MATERIAL. According to the instructions on UI, pull
out the filament. Then, cut its tip and
remove remaining filament.