7
8
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the
MODE
button to select COOL, HEAT,
(cooling & heating models only) or FAN mode.
2. Press the
TEMP
button to set the desired
temperature. The temperature can be set
O
O
O
within a range of 17 C~ 30 C in 1 C
increments.
3. Press the
FAN SPEED
button to select the
fan speed in four steps- Auto, Low, Med,or High.
4. Press the
ON/OFF
button to start the air
conditioner.
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
NOTE
Dehumidifying operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit illuminates.
1. Press the
MODE
button to select DRY mode.
2. Press the
TEMP
button to set the desired
temperature. The temperature can be set
O
O
O
within a range of 17 C~ 30 C in 1 C
increments.
3. Press the
ON/OFF
button to start the air
conditioner.
In the Dehumidifying mode, you can not switch
the fan speed. It has already been automatically
controlled.
NOTE
How to use the buttons
Auto operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit illuminates.
1. Press the
MODE
button to select Auto.
2. Press the
TEMP
button to set the desired
temperature. The temperature can be set
O
O
within a range of 17 C~ 30
in 1 C
increments.
3. Press the
ON/OFF
button to start the air
conditioner.
O
C
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and
Dehumidifying by sensing the difference between the
actual ambient room temperature and the set temper-
ature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE
Swing operation
Use the DIRECTION/SWING button to adjust the
horizontal louver, use the SWING button to adjust
the vertical louver.
1. For RG51Q/BG(C)E models, when press the
DIRECTION/SWING( ) button, the louver
changes 6 degree in angle for each press. If
keep pushing more than 2 seconds, the louver
will swing up and down automatically. Press
the SWING( ) button, the vertical louver will
swing left and right automatically.
2. For RG51J/(C)E models, when press the
SWING button, the louver will swing up and
down automatically.
3. For RG51Q1/BG(C)E models, press the SWING
( ) or ( ) button, the horizontal or vertical
louver will swing automatically. when press the
AIR DIRECTION button, the louver changes 6
degree in angle for each press.
NOTE:
When the louver swing or move to a
position which would affect the cooling
and heating effect of the air conditioner,
it would automatically change the swing/
moving direction.
3
3
4
3
ADJUST
ADJUST
ADJUST
ADJUST
AUTO
COOL
DRY
HEAT
AUTO
COOL
DRY
HEAT
AUTO
COOL
DRY
HEAT
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
FAN
HIGH
MED
LOW
FAN
HIGH
MED
LOW
FAN
HIGH
MED
LOW
MODE
MODE
MODE
MODE
SWING
SWING
SWING
SWING
FAN SPEED
FAN SPEED
FAN SPEED
FAN SPEED
DIRECTION
/SWING
DIRECTION
/SWING
DIRECTION
/SWING
DIRECTION
/SWING
TIMER ON
TIMER ON
TIMER ON
TIMER ON
ECO
ECO
ECO
ECO
ON/OFF
ON/OFF
ON/OFF
ON/OFF
TIMER OFF
TIMER OFF
TIMER OFF
TIMER OFF
RESET LOCK
RESET LOCK
RESET LOCK
RESET LOCK
2
2
2
1
1
1
1
SET TEMPERATURE( C)
SET TEMPERATURE( C)
SET TEMPERATURE( C)
SET TEMPERATURE( C)
