manualshive.com logo in svg

Sinclair MULTI VARIABLE SERIES, Service Manual, Page: 44 / 55

Share
Download
Sinclair MULTI VARIABLE SERIES Service Manual Download Page 44

48

Service Manual

6. 

Remove the 

motor away. 

 

 

 

a) Separate the motor 

away from the motor 
support. 

b) Remove the fan 

blade 

c) Take the motor out 

from the return air 
frame 

Note: the motor support 

shall be removed in 

advance and then changed 

to the unit.   

7.Replace with a 
new motor 

 

 

Assemble the fan as the 

reverse disassembly order 

and then take a power-on 

test. 

5.

Loosen the fan 

blade and fan 
motor   

 

 

Unscrew the fixed screws 
of the fan blades and then 
undo the buckle of the 
motor 

GREE ELECTRIC APPLIANCES, INC. OF ZHUHAI

Add: West Jinji Rd, Qianshan, Zhuhai,Guangdong, China, 519070

Tel: (+86-756) 8522218         

Fax: (+86-756) 8669426

E-mail: [email protected]   www.gree.com

HONG KONG GREE ELECTRIC APPLIANCES SALES LIMITED

Add: Unit 2612,26/F.,Miramar Tower 132 Nathan Road,TST,Kowloon,HK 

Tel: (852) 31658898         Fax: (852) 31651029

For product improvement, specifications and appearance in this manual are subject to change without prior notice.

Summary of Contents for MULTI VARIABLE SERIES
























































Reviews:

No comments