Sinclair MATRIX ASH-18AIM PT, Service Manual, Page: 22 / 96

7HFKQLFDO,QIRUPDWLRQ
6HUYLFH0DQXDO
LIGHT: 15
Press LIGHT button to turn on the display's light and press this button again to turn off the display 's light. If the light is turned
on , is displayed. If the light is turned off, disappears.
SLEEP: 9
CLOCK : 12
TIMER ON :
TIMER OFF :
11
13
TURBO:
10
14
TEMP:
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply press this button again.
Press CLOCK button, blinking. Within 5 seconds, pr or - button adjusts the pressent time. Holding down either
button above 2 seconds increases or decreases the time by 1 minute every 0.5 second and then by 10 minutes every 0.5
second. During blinking after setting, press CLOCK button again to confirm the setting,and then will be constantly dis-
played.
After press of this button, disappears and "ON "blinks. 00:00 is displayed for ON time setting. Within 5 seconds, press
+ or - button to adjust the time value. Every press of either button changes the time setting by 1 minute. Holding down either
button rapidly changes the time setting by 1 minute and then 10 minutes. Within 5 Seconds after setting, press TIMER ON
button to confirm.
X-FAN:
16
Press this button to activate / deactivate the Turbo function which enables the unit to reach the preset temperature in the
shortest time. In COOL mode, the unit will blow strong cooling air at super high fan speed. In HEAT mode, the unit will blow
strong heating air at super high fan speed.
Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button again.TIMER OFF
setting is the same as TIMER ON.
Press this button to go into the SLEEP operation mode. Press it again to cancel this function. This function is available
in COOL , HEAT (Only for models with heating function) to maintain the most comfortable temperature for you.
Press this button, you can see indoor set temperature, indoor ambient temperature on indoor unit’s display.The setting on
remote controller is selected circularly as below:
When selecting " " with remote controller or no display, temperature indicator on indoor unit displays set temperature;
When selecting " " with remote controller, temperature indicator on indoor unit displays indoor ambient temperature;3s
later or within 3s it receives other remote control signal that will return to display the setting temperature.
Caution:
• This model hasn't outdoor ambient temperature display function.While remote controller can operate " "and indoor
unit displays set temperature.
• It’s defaulted to display set temperature when turning on the unit.
• Only for the models with temperature indicator on indoor unit.
no display
Pressing X-FAN button in COOL or DRY mode,the icon is displayed and the indoor fan will continue operation for 2 minutes
in order to dry the indoor unit even though you have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO,FAN or HEAT mode.