Sinclair ASC-60AN User Manual Download Page 15

Example of Timer setting

 

 
TIMER ON (Auto-on Operation)

 

The TIMER ON feature is useful when you want the unit to turn on automatically before 
you return home. The air conditioner will automatically start operating at the set time.

 

Example:

 

To start the air conditioner in 6 hours.

 

1. Press the TIMER ON button, the last setting of starting operation time and the signal 
"h" will show    on the display area.

 

2. Press the TIMER ON button to display "6:0h" on the TIMER ON display of the remote 
controller.

 

3. Wait for about 3 seconds and the digital display area will show the temperature 
again. Now this function is activated.

 

 

TIMER OFF

 

(Auto-off Operation)

 

The TIMER OFF feature is useful when you want the unit to turn off automatically after 
you go to bed. The air conditioner will stop automatically at the set time.

 

Example:

 

To stop the air conditioner in 10 hours.

 

1. Press the TIMER OFF button, the last setting of stopping operation time and the 
signal "h" will show on the display area.

 

2. Press the TIMER OFF button to display "10h" on the TIMER OFF display of the 
remote controller.

 

3. Wait for about 3 seconds and the digital display area will show the temperature again. 
Now this function is activated.

 

COMBINED TIMER

 

(Setting both ON and OFF timers simultaneously) TIMER OFF 

 TIMER ON

 

(On 

 Stop 

 Start operation)

 

This feature is useful when you want to stop the air conditioner after you go to bed, 
and start it again in the morning when you wake up or when you return home.

 

Example:

 

To stop the air conditioner 2 hours after setting and start it again 10 hours after 
setting.

 

1. Press the TIMER OFF button.

 

2. Press the TIMER OFF button again to display 2.0h on the TIMER OFF display.

 

3. Press the TIMER ON button.

 

4. Press the TIMER ON button again to display 10h on the TIMER ON display .

 

5. Wait for the remote control to display the setting temperature.

 

TIMER ON -TIMER OFF 

(Off 

-* 

Start 

-* 

Stop operation)

 

This feature is useful when you want to start

 

the air conditioner before you wake up and

 

stop it after you leave the house.

 

Example:

 

To start the air conditioner 2 hours after setting, and stop it 5 hours after setting.

 

1.  Press the TIMER ON button.

 

2.  Press the TIMER ON button again to display 2.0h on the TIMER ON display.

 

3.  Press the TIMER OFF button.

 

4.  Press the TIMER OFF button again to display 5.0h on the TIMER OFF display .

 

5. Wait for the remote control to display the setting temperature.

 

 

 

CAUTION 

• 

The timer setting(TIMER ON or TIMER OFF) that in sequence occurs directly after 

the set time will be activated first.

 

 

ECO operation

 

The ECO function enables the unit to automatically increase(cooling) or decrease (heating) 
1

O

C per hour for the first two hours, then hold steady for the next 5 hours, after that the unit 

will stop operation. It can maintain the most comfortable temperature and save energy.

 

NOTE: 

The ECO function is only available under Cooling, Heating and AUTO operation.

 

 

 

Summary of Contents for ASC-60AN





















Reviews: