4
NAME OF THE COMPONENTS
1. Operating
panel
2.
Control lamp
3.
Air outlet grid
4.
Air hose connection piece
5.
Air hose
6.
Upper condensation water outlet with rubber plug
7. Cool inlet
8. Cool Air filter
9. Hot inlet
10. Hot air filter
11. Drain pipe
IMPORTANT INSTRUCTIONS
1. Before initiation, check if the operating voltage specified on the type plate complies with the local
network voltage.
2. DO NOT BLOCK THE VENTILATION. Make sure that the air outlet and air inlet are never blocked.
3. Only operate the unit on a horizontal surface to ensure no water leaks out.
4. The unit must not be operated in an area with explosive and caustic substances.
5. Clean the air filter regularly. A contaminated air filter reduces capacity.
6. Please wait at least 5 minutes after switching off the unit before switching it back on, to ensure the
compressor is not damaged.
7. The compressor of the unit has a power demand of at least 7 amps. Do not use any extension
cable with this unit.
8. The unit is designed for the cooling, heating and dehumidification of inside rooms. Other use is
excluded.
9. If the power cable is damaged, it must be replaced by a qualified specialist for safety reasons.
10.
CAUTION!
This unit may only be used by persons (including children) with reduced physical,
sensorial or mental capacity or with insufficient experience and lack of specialist know-how, if such
persons are supervised by a person responsible for their safety or who has been trained in the use
of the unit. Children should be supervised to ensure they do not play with the unit.
It
is
not
allowed
to
extend
the
hose/pipe
to
blow
the
hot
exhaust
air
from
the
mobile
unit.
