5
OPERATING PANEL
DESCRIPTION OF FUNCTIONS
1.
[POWER]
Press this switch to switch on or off
2.
[FUNC]
Press this switch to select between the functions “Cooling”, „Heating“ or „Dehumidity“
3.
[TEMP+]
Press this switch in the cooling function in order to set the required room temperature by 1°C
respectively up to a maximum temperature of 30°C.
Press this switch in the heating function in order to set the required room temperature by 1°C
respectively up to a maximum temperature of 25°C
4.
[TEMP-]
Press this switch in the cooling function in order to set the required room temperature by 1°C
respectively up to a minimum temperature of 17°C.
Press this switch in the heating function in order to set the required room temperature by 1°C
respectively up to a minimum temperature of 15°C
5. LED-DISPLAY
The display shows the required target temperature.
By pressing the
[TEMP+] or
.
[TEMP-]
switch, the required target temperature is briefly displayed. On
pressing the
[TIMER]
switch, the number of hours is briefly shown until activation or deactivation. After
each manual setting, the display automatically shows the required target temperature. In the
dehumidification function, “
DH
” is shown in the display. Error messages are also shown in the display.
5. [SPEED]
Press this switch to set the ventilation speed to “LOW”, “MID” (middle), “HI” (high) or “AUTO”
(automatic). If “AUTO” is selected, the ventilator operates at temperature differences larger than 9
degrees at top speed. If the temperature reduces to a difference smaller than 4 degrees, the ventilator
switches to middle blower position. If the temperature reduces further until the target temperature, the
ventilator switches to the lowest blower position.
