Sinbo SKS 4511, Instruction Manual

Page: 7 / 28

- 6 -
ERROR DISPLAY INTRODUCTION
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations, hand in the non-working
electrical equipments to an appropriate waste disposal center.
• When the scale is over loaded, the “EEEE” will appear on the display.
• When the screen shows “
”, it means that the power isn’t enough, please change
the batteries as soon as possible.
• When the screen shows “OUTZ” or “UNST”, and power off. It means the object over
loaded or unsteady.
INTRODUCTION OF USING AND INSTALLING THE BATTERIES
• Use 2PCS AAA batteries.
• When change the batteries, please open the battery cover on the back, put 2PCS AAA
batteries in the battery case (make the positive poles towards), then close the battery
cover tight.
• The product use 2PCS AAA batteries, please install it before using.
ADVICE FOR USE AND CARE
• Put the scale on a clean and flat table.
• The max. weight of the scale is 5000g,-3000g(SKS 4511) which included the weight
before tare.
• To ensure the life of the scale, do not put the scale under wet, hot & cold condition.
• The product belongs to high precision electronic weighing apparatus, please do not
press or drop the scale otherwise the scale is easy to damage.
• If the scale surface is dirty, please clean the scale with soft cloth, do not use any
chemical detergent and allow water to get inside the scale.
• The product is for small goods weighing only, do not use for legal trade.
• If the result appears improperly, please check about whether the batteries and the
touching point contact well. Replace for new batteries if used for a long time already,
then try again. If necessary, contact the local franchisers or telephone company.