Sinbo SJ 3136, Instruction Manual

Page: 7 / 31

- 6 -
PREPARING THE CITRUS JUICER FOR USE
Always clean cone, sieve, sieve holder and spout before you use the appliance for the first time (see
‘Cleaning’)
FIG . 1
HOW TO USE YOUR APPLIANCE (FIG .1)
1. Place the appliance on a firm, level surface out of the reach of children.
2. Plug in.
3. Put the Sieve holder on place correctly.
4. Put on the sieve.
5. Then insert the cone.
6. Switch the appliance on by pressing the halved fruit firmly onto
the cone. The juice will be extracted quietly and quickly.
7. Put a vessel under spout. Flip the spout down towards the glass.
The instant flow system guides juice directly into vessel.
8. After you have finished, flip the spout up to prevent dripping and
spilling juice.
9. Always clean the appliance immediately after use (see in ‘Cleaning’)
10. Cord and cone storage under Citrus Juicer base, place the cone into the hole then cover it, and exit
cord through the opening at the back of the appliance.
CLEANING
1. Unplug cord from electrical outlet. Remove the cone, sieve and sieve holder from the appliance.
2. Flip the spout down fully in order to clean it properly. The spout cannot be detached from the appliance.
3. Clean the cone, sieve and sieve holder by using warm soapy water. Dry all parts. Do not clean these
parts in a dishwasher.
4. Clean the motor unit by using a moist cloth Never immerse the motor unit in water or rinse it under
the lap.