INSTALLATION INSTRUCTIONS
Power Source
220-240V AC Class I
Lumens
7W: 235 lm
13W: 360 lm
Colour Temperature
Warm White 3000K
Protection Rating
IP65
Mounting
Wall
Construction
Powder Coated Aluminium,
UV Stabilsed Polycarbonate
BEFORE YOU START
TECHNICAL SPECIFICATIONS
Please read all the instructions prior to installation.
This product is suitable for use only with a supply voltage of 220-240V AC 50Hz.
All electrical work must be carried out in accordance with local and national electrical codes as applicable.
We strongly recommend that this light fitting is installed by a registered electrician.
Always switch power off prior to installation. A means of mains power isolation must be installed in the circuit
for the purpose of safe access for any internal cleaning, recalibration, or maintenance.
This light fitting is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Young children should be
supervised to ensure that they do not play with the appliance.
Any changes or modifications made or attempted to this product, without the prior written approval of the
manufacturer, will void any and all stated warranties.
IMPORTANT
!
WAKATIPU
The Simx Lighting Wakatipu Wall Light is a contemporary design, high quality LED luminaire.
Water proof and dust proof, it is rated for exposed exterior locations.
The Wakatipu Wall Light should be wired to its own light switch.
Do not connect with other lamp types on the same switch.
An earth connection must be used for electrical safety.
For all locations, please check that the direction of the beam will not cause undue glare to neighbouring
properties.
LHT1115 ANTHRACITE / LHT1116 WHITE
7W LED Wall Light
LHT1117 ANTHRACITE / LHT1118 WHITE
13W LED Wall Light
