Please read all the instructions prior to installation.
The Robo LED should be wired to its own light switch. Do not interconnect with other lamp types on the
same switch.
An earth connection must be used for electrical safety.
To achieve best results, please consider the following points:
Robo LED is best mounted 1.8 to 2.5 metres above the ground.
To avoid damage to unit, do not aim the sensor towards the sun.
To avoid nuisance triggering, the sensor should be directed away from heat sources such as barbecues,
Air-conditioners, other outside lighting, moving cars, flue vents and areas of strong electromagnetic
disturbance. Do not aim towards reflective surfaces such as smooth white walls or swimming pools.
Nuisance triggering may also occur during inclement weather. The sensor will stabilise again when the
weather clears.
The PIR detection specifications may vary slightly depending on the mounting height and location. The
detection range of the unit may also alter with temperature change. Before selecting a place to install your
Robo LED, you should note that movement across the scan area is more effective than movement directly
toward or away from the sensor. If movement is made walking directly towards or away from the sensor
and not across, the apparent detection range will be substantially reduced.
IMPORTANT
Do not attempt to aim the floodlight head manually when in motorised function. Manually aiming whilst
under power may cause irreparable damage, and may void any warranties.
The Robo LED Light incorporates a PIR (passive infrared) sensing device which continuously scans a preset
detection zone and immediately switches the light on when it detects movement in that area.
This floodlight can be set to then follow the movement of the subject in the detection zone automatically.
While there is movement within range of the unit the light will remain on.
This light fitting is rated to IP44 making it suitable for sheltered exterior locations, please ensure the desired
location does not exceed this rating.
BEFORE YOU START
INTRODUCTION
