![background image](http://html.mh-extra.com/html/simu/2008924/2008924_translation-of-the-original-manual_1279426005.webp)
5/36
EN-
CONTROL UNIT veoHz
TRANSLATION OF THE ORIGINAL MANUAL
Read this manual carefully
before using the device.
S.A.S. (simplified joint-stock company) with capital of €5,000,000 - Z.I. Les Giranaux - BP71 - 70103 Arc-Les-Gray CEDEX - FRANCE - RCS VESOUL B 425 650 090 - SIRET 425 650 090 00011 - VAT no. EC FR 87 425 650 090
5128061A
WARNING! Important safety instructions. Carefully read and comply with all the warnings
and instructions that come with the product as incorrect installation can cause injury to people
and animals and damage to property. The warnings and instructions give important information
regarding safety, installation, use and maintenance.
Please keep the instructions so that you can attach them to the technical file and keep them handy
for future reference.
1.1 GENERAL SAFETY
This product has been designed and built solely for the purpose indicated herein. Uses other than
those indicated herein might cause damage to the product and create a hazard.
This product complies with Directive 2014/53/EU (Radio directive).
Do not drop the product.
- The components of the device and the installation must comply with the standards in force in the country
where it is used. Cabling methods are given by national standards or IEC 364 standard.
- The manufacturer of this product (hereinafter "the Manufacturer") disclaims all responsibility resulting
from improper use or any use other than that for which the product has been designed, as indicated
herein, as well as for failure to apply Good Practice in the construction of entry systems (doors, gates,
etc.) and for deformation that could occur during use.
- The installation must be carried out by a competent person (professional installer in accordance with
EN 12635), in accordance with the correct technique and standards in force.
- Before commencing installation, check the product for damage.
- Make sure the stated temperature range is compatible with the site in which the automated system is
due to be installed.
- Do not install this product in an explosive atmosphere: the presence of flammable fumes or gas
constitutes a serious safety hazard.
- Install any fixed controls in a position where they will not cause a hazard, away from moving parts. More
specifically, hold-to-run controls must be positioned within direct sight of the part being controlled and,
unless they are key operated, must be installed at a height of at least 1.5 m and in a place where they
cannot be reached by the public.
- Attach a label near the operating device, in a permanent fashion, with information on how to operate the
automated system’s manual release.
- Only use original spare parts for any maintenance or repair work. The Manufacturer disclaims
all responsibility for the correct operation and safety of the automated system if parts from other
manufacturers are used.
- Do not make any modifications to the automated system’s components unless explicitly authorised by
the Manufacturer.
- Instruct the system’s user on what residual risks may be encountered, on the control systems that have
been applied and on how to open the system manually in an emergency: hand over the user manual to
the end user.
- Dispose of packaging materials (plastic, cardboard, polystyrene, etc.) in accordance with the standards
in force. Keep nylon bags and polystyrene out of reach of children.
- Check the installation frequently in order to detect any imbalance or signs of wear or damage to cables,
springs and the installation. Do not use the device if it needs repair or adjustment.
SAFETY INSTRUCTIONS
EN-