Simrad SH40
How to enable target track
Observe this procedure to initiate a target track.
1
Place the cursor over the desired target.
2
Press the
Target track
button in the
Train
field on the Sonar
Control Panel.
A circle will appear on the display and its position automatically
tracked by the system using the strongest echo centred in the
"window" represented by two lines on the audio line. The
"window’s" size may be selected by the
Track Window
button
in the
Setup
menu.
The vector originating from the target’s centre indicates its
course and speed. The length of the vector increases relative
to the target’s speed. One knot is represented by a small mark
on the vector. A course line can also be displayed showing the
target’s track. Target tracking symbols and data are displayed
with a light violet colour.
How to add a target tracking line
Observe this procedure to add a tracking line to a tracked target
to indicate its movement history.
1
Choose an operational mode with a horizontal view.
2
Press the
View
button in the
Cursor
field on the Sonar
Control Panel.
3
Observe that the
GeoView
short-cut menu appears on the
display.
4
Click the
Target track
option on the menu.
5
Observe that the
Target track
parameter dialogue opens
below the menu.
6
Choose the length of the tracking line, and click
Close
to
exit.
30
302656/A
