Power on/off
How to switch off the sonar
Observe the following procedure.
Middle
Up
Down
MAIN SW.
POWER
A
B
C
D
(CD015022B)
1
Press the
Up
button (B) on the Sonar Control Panel.
• The transducer will automatically be hoisted, and it will
stop when it has been fully retracted. The dialogue at
the bottom right corner of the display will tell you when
the transducer has been fully retracted.
2
Press the
Power
button (A) on the Sonar Control Panel, and
keep it depressed for approximately two seconds.
• The sonar is switched off. Note that you must NOT
use the on/off switch on the computer, only this
Power
button on the Sonar Control Panel.
3
Switch off the display monitor.
If the sonar is switched off by mistake before the transducer has
be hoisted, or you have problems with the electrical power, you
can also hoist the transducer manually.
302656/A
9
