Simrad - RS12 Operation and Installation Instructions
48
The following items should be supplied in
the box. Check before starting the instal-
lation and contact your dealer if an item is
missing.
Note:
An antenna is
not
provided. Consult
your Simrad dealer for advice if necessary.
1.
Mounting gimbal for the VHF radio
2.
Power supply cable with in-built 7 Amp
fuse
3.
External speaker connection cable with
white (+) wire and black (-) wire
4.
GPS connection cable
5.
Two mounting knobs
6.
Microphone bulkhead mount
7.
Four countersunk self-tapping screws
for the mounting gimbal
8.
Four flat screws for the mounting
gimbal
9.
Four spring washers for the mounting
gimbal
10. Four plain washers for the mounting
gimbal
11. Four nuts for the mounting gimbal
12. Two self-tapping screws for the
microphone bulkhead mount
13. Two flat screws for the microphone
bulkhead mount
14. Two spring washers for the
microphone bulkhead mount
15. Two plain washers for the microphone
bulkhead mount
16. Two nuts for the microphone bulkhead
mount
17. Two adapter plates for recessed
installation
18. Screw kit for recessed installation
Not pictured:
•
Installation template and Warranty card
•
DSC Warning label sticker
•
This Operation and Installation manual
•
One 7 Amp spare fuse in case of ac-
cidental reverse of battery polarity
•
Base unit and microphone
Checklist
1
5
2
17
7
8
9
10
11
12
13
14
15
16
6
18
3
4
