1
Avoid mounting within 1 m (3.3’) to port (left) of propeller
2
Conventional clockwise propeller rotation
3
Avoid mounting within 7.5 cm (3“) to starboard of propeller
4
Best mounting location - undisturbed water flow
5
Planing strake - avoid mounting behind here
Ú
Note:
Reverse the distance guides (1 & 3) from propeller where engine is of
counterclockwise configuration.
Ú
Note:
Vessels with strakes or ribs on the hull can create large amounts of turbulence at
higher speeds. A good transducer location on these types of boats is between the ribs
closest to the engine.
Ú
Note:
If the transducer is not placed in a smooth flow of water, interference caused by
bubbles and turbulence may show onscreen in the form of random lines or dots. The
unit could also lose bottom signal when the boat is on plane.
Ú
Note:
Trim tabs vary in the amount of turbulence they create as they are adjusted, stay
clear of these.
Transducer installation
For transducer installation information, refer to separate installation instructions included
with the transducer.
14
Installation
| NSS evo3 Installation Manual
