Simrad NSO, Operation Manual

Page: 90 / 116

Audio | 89
14 Audio
When the NSO is connected to a SonicHub server you can use your unit to control
audio playback from iPod, iPhone, USB mass storage device (mp3), satellite (SIRIUS™)
and AM/FM radio. Before playing FM radio through the SonicHub, you must purchase a
marine-grade AM/FM antenna.
When connected to a WM-2 Satellite module you can subscribe and include Sirius™
audio on your NSO system. Sirius™ audio and weather service covers inland US waters
and coastal areas into the Atlantic and Pacific oceans, Gulf of Mexico and the Caribbean
Sea. The Sirius™ audio products received vary depending on your selected subscription
package. For more information refer to www.sirius.com.
Before you can start using your equipment, it must be installed according to the
Installation manual included with the unit.
Enabling Audio
You must enable Audio to control audio on your NSO unit.
When audio is enabled, the media bar will appear at the bottom of the screen on
all pages. The media bar varies from one audio source to another.
You switch focus between other panels and the media bar by pressing the WIN
key.
Selecting the audio source (SonicHub only)
You switch between available audio sources from the audio menu.
When the audio is re-started it will start with the settings that was active when turned
off.
NOTE: The Mic source selects a high voltage level input allowing you to broadcast loud
hailer messages over the audio system.
Operating the audio source
You operate the audio devices by using the function keys, the keypad and the audio
menu.
Function keys
Descrase/increase volume or
IN OUT
Mute
MENU WIN
or