Installation procedure
Figure 2
Screen Resolution
dialog with default parameters shown
4
Set
Multiple displays
to
Show desktop only on 2
, then click
Apply
.
5
Observe message dialog:
Do you want to keep these display settings?
6
Click
Keep change
.
7
Set
Resolution
to
1280 x 1024
, then click
Apply
.
8
Observe message dialog:
Do you want to keep these display settings?
9
Click
Keep change
.
10
Click
OK
to save the current settings and close the dialog.
Dual display
The ES70/PI50 Marine Computer is provided with Windows 7
®
operating system,
and all operational software installed. This includes the display setup. However, the
computer will automatically sense the display you connect during system installation,
and which video output you use. Depending on these choices, you may need to set up the
display resolution to fit your requirements.
Two procedures are provided. One is used if you wish to use a single display. The other is
used if you wish to set up the computer with two displays providing the same information.
Note that the Marine Computer appears to have three video outputs. This is not the case.
Output 1 does not exist, and must not be used.
This procedure is used when you wish to use two displays. You must then connect one
display to the VGA output, and one display to the DVI output.
Note
The video output stream on the VGA output can be inhibited before the display setup has
been done. This will cause the display screen to turn black. The image will return when
the setup procedure has been completed.
345266/A
9
