Simrad ES70/PI50 Marine Computer
Display setup
Topics
•
Single display
on page 8
•
Dual display
on page 9
Single display
The ES70/PI50 Marine Computer is provided with Windows 7
®
operating system,
and all operational software installed. This includes the display setup. However, the
computer will automatically sense the display you connect during system installation,
and which video output you use. Depending on these choices, you may need to set up the
display resolution to fit your requirements.
Two procedures are provided. One is used if you wish to use a single display. The other is
used if you wish to set up the computer with two displays providing the same information.
Note that the Marine Computer appears to have three video outputs. This is not the case.
Output 1 does not exist, and must not be used.
This procedure is used if you wish to use a single computer. It can be connected to
either the VGA or DVI output.
1
Place the cursor on the computer desktop, and right-click to open the short-cut menu.
2
Select
Screen Resolution
on the menu.
3
Observe the default configuration:
•
Displays
: 1|2 Multiple Monitors
•
Resolution
: 1024 x 768
•
Orientation
: Landscape
•
Multiple displays
: Duplicate these displays
8
345266/A
