Simrad HS80/MX575C, User Manual

Page: 49 / 55

48 |
Technical specifications | HS80/MX575C User Manual
Line Description
14 This line indicates the current frequency of the L-band receiver
15
This line indicates the current maximum acceptable differential age in
seconds
When issuing this command with the optional, ‘subset’ data field (without the square
brackets), a one-line response is provided. The subset field maybe either CONF or GP.
When CONF is specified for ‘subset’, the following response is provided.
$>JSHOW,CONF,N,0.0,10.0,5,A,60W
This response is summarized in the following table.
Message
Component
Description
$>JSHOW,CONF Message header
N N ‘N’ indicates no altitude aiding
0.0
‘0.0’ indicates the aiding value, if specified (either specified height or
PDOP threshold)
10.0 Residual limit for the $JLIMIT command
5 Elevation mask cutoff angle, in degrees
A AIR mode indication
60 Maximum acceptable age of correction data in seconds
W Current differential mode, ‘W’ indicates WAAS mode
When GP is specified for ‘subset’, the following is an example response provided:
$>JSHOW,GP,GGA,1.0
This response will provide the >$JSHOW,GP message header, followed by each message
currently being output through the current port and also the update rate for that message.