manualshive.com logo in svg

Simrad HS50, Instruction Manual

Share
Download
Simrad HS50 Instruction Manual Download Page 15

TECHNICAL SPECIFICATIONS 

20221081 / F 

7

 

Processing unit 

Width: ...............................................................287 mm (11.3 in.) 

Height: ...................................................................203 mm (8 in.) 

Depth: ...................................................................60 mm (2.4 in.) 

Weight: ................................................................ 1.3 kg (2.9 lbs.) 

Color: ................................................................................... Black 

Dimensional drawing........................................................Page 53 

2.6

 

Power 

Processing unit 

Voltage:.................................................................. 10 to 36 V DC 

Power consumption: .............................................................15 W 

2.7

 

Environmental specification 

Sensor unit 

Enclosure material, sensor housing: .........................Polyethylene 

Enclosure material bracket: ..........................Anodized aluminum 

Enclosure protection: ............................................................. IP65 

Operating temperature range: ........... -30 to +55ºC (-22 to 131°F) 

Operating humidity (max.): ................................................. 100% 

Storage temperature range: ............... -30 to +70ºC (-22 to 158°F) 

Storage humidity (max.): ..................................................... 100% 

Safe distance to compass: ........................................ 0.2 m (0.7 ft) 

Display unit 

Enclosure protection: .............. IP-56 from front, IP-43 from back 

Operating temperature range: ................0 to +55ºC (32 to 131°F) 

Storage temperature range: ............... -30 to +80ºC (-22 to 176°F) 

Safe distance to compass: ..................................... 0.35 m (1.1 ft.) 

Summary of Contents for HS50
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands