Simrad - HH33 Installation and Operation Instructions
59
5-13 Receive an individual call
The radio makes a friendly two-tone alert when it detects an incoming DSC call.
Incoming individual calls are always a priority, and should be part of your protocol.
RCV: INDIV
123456789
ROUTINE
ENTER->ACK
67 CHANNEL
REQUEST
ESC->EXIT
If the radio recognizes the user MMSI as one of your buddies, your buddy’s name is dis-
played. Your radio can automatically or manually reply to the incoming caller depending
on the INDIV REPLY settings.
Press ENTER to send an acknowledgement to the incoming caller, or HH33
1.
automatically sends an acknowledgement to the caller. This stops the two-tone
alert. The radio automatically detects the channel of the incoming call.
The caller should respond, you can press PTT to initiate contact.
2.
5-14 Receive a Polled Position Call
POSITION ACK
12341234
ESC > EXIT
POSITION ACK
12:45 UTC
82°50.123’N
127 ° 45.142’W
When you receive GPS position data from a buddy in response to your LL request, you are
recommended make note of it - especially if it is a good fishing position.
If enhanced LL position information is available, it is shown on the LCD until the display
changes.
Section 6 - Distress Calls (US only)
Note:
You must have entered a valid user MMSI to send and receive DSC DISTRESS calls.
6-1 Send a Distress Call
DISTRESS CALL
>UNDEFINED
FIRE
FLOODING
DISTRESS CALL
>UNDEFINED
HOLD DISTRESS
3 SECONDS . .
DISTRESS CALL
SENT! WAIT . .
PRESS ESC
TO CANCEL
