Simrad - HH33 Installation and Operation Instructions
10
Press and hold down SCAN for more than 2 seconds to enter ALL SCAN mode where the
priority channel is checked every 1.5 seconds.
When a signal is received, scanning stops at that channel and “R” appears on the screen. If
the signal ceases for more than 5 seconds, the scan restarts.
In ALL SCAN mode, when a signal is received, holding down left- key for more than 2
seconds makes appear on the screen. This “always busy” channel will not have been
skipped in the next scan period. If this channel needs recover, holding down left-key once
again for more than 2 seconds makes disappear. The skip function is cancelled accord-
ingly. Besides, it is impossible to skip over the priority channel.
Enter. Use ENTER when navigating menus, to confirm entries and edits.
CH
/
Channel Select. The current channel is shown on the screen in BIG digits with the channel
description information below the channel number.
Press
CH
/ to step through the available channels one at a time, or hold down to scroll
quickly through all the available channels. See Appendix B for a listing of channel charts.
Alphanumeric Entry. This key can also be used for menu selection and alphanumeric en-
try. Press
CH
/ to scroll the cursor up or down menu options when navigating menus.
When editing an item that contains only numbers, press -
CH
to count through the
numbers or hold down to scroll through quickly.
To enter a character, press
CH
to step through the alphabet or hold down to scroll
through quickly.
HI/LO/
Transmission Power. High (HI) 5W or Low (LO) 1W. Press to toggle between high or low
transmission powers for the entire channel bank. The or selection is shown on the
LCD screen.
Some channels allow only low power transmissions. Error beeps will sound if the power
transmission setting is incorrect.
Some channels allow only low power transmissions initially, but can be changed to high
power by holding down HI/LO and PTT all at the same time. See Appendix B for a com-
plete listing of channel charts.
hold down and enter GPS Satellite mode.
WX/NAV
Quickly press to access WX channel (US/Canada only).
