Simrad - HH33 Installation and Operation Instructions
32
Select GPS/DATA in radio setup MENU.
1.
The cursor is at MANUAL. Push ENTER.
2.
The cursor is at the first latitude position.
3.
Use the CH
4.
/ to enter the latitude one number at a time. Press ENTER to move
cursor to the longitude line.
Use the CH
5.
/ to enter the longitude coordinates one number at a time. Press
ENTER to move cursor to the UTC line.
Use the CH
6.
/ to enter the UTC one number at a time then press ENTER.
After you enter the last number of the UTC, a new screen appears automatically to
7.
show the position and time data. The prefix M indicates a manual entry. If you made
a mistake, repeat these steps to enter the correct data.
4-6-2 Settings: LL Display (Show or hide your position)
If your position and time data is being updated automatically, you can use LL DISPLAY to
choose whether to show or hide your position on the screen.
LL DISPLAY
>ON
OFF
MENU SELECT
BUDDY LIST
CONTRAST
>GPS/DATA
GPS/DATA
MANUAL
>SETTING
SETTING
TIME FORMAT
TIME DISPLAY
>LL DISPLAY
In the radio setup MENU, select GPS/DATA, then SETTING.
1.
Move the cursor to LL Display and press ENTER.
2.
The cursor is at ON (to show your position).
3.
If you want to hide your position, move the cursor to OFF. Press ENTER to confirm your
selection.
4-6-3 Settings: Time Display (Show or hide the time)
If your position and time data is being updated, you can use TIME DISPLAY to choose
whether to show or to hide the time on the screen.
TIME DISPLY
>ON
OFF
MENU SELECT
BUDDY LIST
CONTRAST
> GPS/DATA
GPS/DATA
MANUAL
>SETTING
SETTING
TIME OFFSET
TIME FORMAT
>TIME DISPLY
