Simrad GC80 Compact MK2, User Manual

Page: 78 / 156

Simrad GC80/85 Dual MK2 Gyro Compass
988-12720-002 64
6
Repeat step 5 for sub-category
1.3.S
,
1.4.u
,
1.5.L
and
1.6.t.
7
Press the
SET
button again to return to main category
A1
, and then
press the DISP button to go to A2 main category.
8
Press the
SET
button, and enter values for
2.1.o
and
2.3.h
as
described above.
9
While still in
A2
main category, enter values for
2.5.y
(Year),
2.6.N
(Month and Day), 2.7.t (Hour and Minute) and 2.8.d (total days of
operation. This value should be reset after installation).
Note!
All time parameters should preferably be in CET (Central European Time)
or, if not possible, in local time.
10
Press the
SET
button again to return to main category
A2
, and then
press the
DISP
button until main category
A7
is displayed.
11 Exit the sub-category by pressing the SET button, and then exit the
Extension main category by pressing and holding the
SET
and
ACK/ENT buttons simultaneously for appr. 3 seconds.
For more information about the Extension menu, see
ADVANCED
SETTINGS , page 70 onwards.
Setting the Latitude input source
When the system is configured as described in
Configuring the Sensitive
element page 63 onwards, the latitude input source can be changed as
described below:
1 Press the DISP button until the display shows latitude value.
2
Press the
SET
button once, and the upper line in the display starts
flashing.
3
Use the
ARROW
buttons to select
Gyro
or
GPS
as the latitude input
source, and confirm the entry by pressing the ACK/ENT button.
- If Gyro is selected, the display will change to flashing numbers.
- If GPS is selected, the display will show the latitude value read from
the GPS.