Getting started
Starting normal operation
Once you have powered up the complete ES70 system, you are ready to start the
actual operation. When started up, the ES70 will automatically apply its previous
setup parameters.
These procedures are partly provided to get you acquainted with the basic functionality
provided by the ES70, and partly to set up the system for normal use. If you already
know the ES70, or the current parameters are acceptable, you do not need to carry out
the procedures.
The procedures assume that the ES70 has at least one frequency channel (transceiver and
transducer) readily connected. If this is not the case, observe the relevant installation
procedure.
The relevant procedure is located in the
Simrad ES70 Reference manual
.
Topics
•
on page 23
•
How to choose operational mode
on page 24
•
How to check the transceiver and transducer settings
on page 24
•
How to check the bottom detector settings
on page 25
•
How to check the colour scale settings
on page 26
•
How to check the size distribution and fish position settings
on page 27
•
How to check the echogram settings
on page 28
•
How to check the range settings
on page 30
•
How to save the current user settings
on page 32
How to select menu language
The menu buttons – as well as other text – in the ES70
presentation are available in several languages.
1
Observe the
Main
menu. It is normally located on the right hand side of the ES70
presentation.
2
Click the
Display
icon under the
Main
menu to open the
Display
menu.
→
on page 105
3
Click the middle of the
Language
button to open the list of available languages.
You can also click the [
+
] and [
–
] characters on the button to leaf through the list
of available languages.
4
Click once on the language you wish to use.
343539/B
23
Summary of Contents for ES70 - DOWNLOAD AND INSTALLATION REV B
Page 2: ......
Page 128: ...ISBN 13 978 82 8066 118 0 2010 Kongsberg Maritime AS ...
