Simrad ES60
INSTALLATION PROCEDURES
This chapter provides the basic information required to install
the physical units.
Note
Physical installation of commercial units (computers, printers,
displays) is not described in this manual. Refer to the applicable
user manual(s) provided with the product.
Topics
Basic procedure
on page 26
Configuration
on page 27
General Purpose Transceiver installation
on page 31
ES60 Marine Computer installation
on page 33
Basic procedure
This is the basic installation procedure.
1
Check that you have received all parts required for the
installation; cables, connectors, brackets etc.
2
Install the transducer(s) and the transducer cables according
to the guidelines in this manual and the drawings provided
with the transducer.
3
If applicable, install the two-wire cable for the temperature
sensing thermistor.
4
Mount the Processor Unit (computer) and the display using
the appropriate brackets.
5
Connect the computer and display cables:
• Power cable to display monitor.
• Power cable to computer.
• Video cable from computer to display monitor.
• Connect the pointing device (mouse or trackball)
6
Mount the General Purpose Transceiver using the
appropriate brackets.
7
Connect the cables:
• Transducer cable(s)
• Power cable(s)
• If applicable, connect the cable from the temperature
sensor.
• If available, install a two-wire cable for remote on/off of
the General Purpose Transceiver(s).
26
304699/A
