Simrad ES200-7CD
The drawing is normally provided with the following text (or
similar):
Note: The self-lock threads marked with SL* must be made in
accordance with procedure 842–202125. Drill diameters for
threads differ from standard. Self-lock taps can be supplied by
Simrad.
Taps
The pretension locking thread self–lock (taps) from manufacturer
Emuge
must be used.
Figure 7 Example of use
(CD017020C)
Note
In the case of tapping through holes it is important that the
pro
fi
le of the
Emuge self-lock
threads is in the correct direction
compared with the entering direction of the bolt.
Gauge
Use
Emuge self-lock
gauges. Note that the gauge must be used
in the correct direction.
Self-lock taps provided by Simrad
The following self-lock taps are on stock at Simrad, and can be
ordered from us.
Threads
Drill diameter for
threads
Part.no
M6
ø5.2
700-078838
M8
ø7.0
700-078531
M10
ø8.8
700-078408
M12
ø10.7
700-078409
M16
ø14.5
700-078410
16
307121/A
Summary of Contents for ES200-7CD - REV B
Page 2: ......
