Simrad EC150-3C, Installation Manual

Page: 71 / 150

438371/A
69
• Ropes and tackles
• Transportation cart
Context
A transducer must always be handled as a delicate instrument. Incorrect actions may
damage the transducer beyond repair. Observe these transducer handling rules:
•
Do not
activate the transducer when it is out of the water.
• Do not handle the transducer roughly and avoid impacts.
• Do not expose the transducer to direct sunlight or excessive heat.
• Do not use high-pressure water, sandblasting, metal tools or strong solvents to clean
the transducer face.
• Do not damage the outer protective skin of the transducer face.
• Do not lift the transducer by the cable.
•
Do not
step on the transducer cable.
• Do not damage the transducer cable, and avoid exposure to sharp objects.
Procedure
1 Prepare a cart or any other type of suitable transport vehicle.
2 Place a protective mat on the cart to safeguard the transducer face.
3 Open the shipping box.
Note
Be careful! Do not use heavy tools. Do not use excessive force. Make sure that you
do not damage the transducer or the cable.
4 Lift the transducer straight up and out of the box.
Note
DO NOT lift it by the cable!
5 Place the transducer on the cart for transport to the mounting location.
6 Transport the transducer carefully to its mounting location.
Related topics
Installation summary, page 61
Installation