Simrad EC150-3C, Installation Manual

Page: 119 / 150

438371/A
117
Basic functionality test
Topics
Defining the IP address on the Processor Unit network adapter for communication with
the EC150-3C, page 117
Functional test of the EC150-3C Transducer, page 118
Defining the IP address on the Processor Unit network
adapter for communication with the EC150-3C
The communication between the Processor Unit and the transceiver(s)/transducer(s) is
made using a high capacity Ethernet cable. If more than one transceiver or transducers
are used, an Ethernet switch is added. On the EK80, the necessary IP address is generated
automatically. However, we recommend that you manually define which IP Address and
Subnet mask the Ethernet adapter in the Processor Unit shall use for this communication.
Prerequisites
This procedure is made for the Microsoft ® Windows ® 7 and 10 operating systems. It is
assumed that you are familiar with these operating systems.
Context
As long as you do not change the Processor Unit to another computer, or replace the
network adapter in your Processor Unit, you will only need to do this once.
Procedure
1 On the Processor Unit, close the EK80 program.
2 Open the
Network Connections
dialog box.
This procedure is made for the Microsoft
®
Windows
®
10 operating system.
a In the bottom-left corner of your desktop, select the Windows ®
Start
button.
b On the menu, select
Settings
.
c Observe that the
Settings
window opens.
d Select
Network & Internet
.
e Select
Change adapter options
.
f Select the network adapter you are going to use; then right-click and select
Properties
on the short-cut menu.
g On the list of connections, select
Internet Protocol 4 (TCP/IPv4)
, and then
Properties
.
Setting to work