Simrad CP42, User Manual

Page: 55 / 148

CP42/50/52 Waypoint/route menus Chapter 5
55
5.2.1 Delete route via menu
MENU
Call up the menu bar, and…
3,2
load route list
+/-
Select the route you wish to delete
ENT
Press
[ENT]
to open for editing
WIN
Press [WIN] to delete route
CLR
Confirm
)
Edit routes directly on the chart via info windows. Refer to section
3.3.4 and 3.3.5.
5.2.2 Make new route from WP list
When you have a number of waypoints stored in the WP list which
would be convenient to link together as a route it is easily done via the
route list.
MENU
Call up the menu bar, and…
3,2
load route list
CLR
Make new route from WP list
Use the cursor to go up/down in the WP list to select the position you
wish to add to the route, then…
+/-
By means of the +/- keys you can control where the highlighted posi-
PLOT
Tion is placed in the route,press [PLOT]
- the last point in the RtePt panel is empty, and as such will allow you
to enter a new final routepoint. Once a WP position is transferred to the
routepoint section, there is no longer any connection between the
position and the waypoint in the WP list.
Select the next position and press [PLOT]. Continue in this manner
until the route is completed. In case you make a wrong plot, you can