background image

Backlight level: Adjusts the backlight level from Min (10%) to Max
(100%) in 10% increments

- When the Backlight level field is active, subsequent presses on

the backlight key adjusts backlight level in decrements of 30%

Display group: Defines which network group the unit belongs to

Night mode: Activates/deactivates the night mode color palette

Night mode color: Sets the night mode color palette

Invert day color: Changes the background color for the pages
from default black to white

Sleep: Turns the backlight for screen and keys off to save power

Files

File management system. Used to browse the contents of the unit's
internal memory and the content of a device plugged into the unit's
USB port.

Simulate

Runs the display with simulated data. Use the simulator to become
familiar with your unit before using it on the water.
When activated, the simulator mode is indicated on the display.

Restore defaults

Allows you to select which settings are to be restored to their
original factory settings.

Global reset

Resets the source selection on all displays connected to the
network.

About

Displays copyright information, software version, and technical
information for this unit.

44

Software setup

| AP44 Operator Manual

Summary of Contents for AP44





























































Reviews: