Simrad AP16, User Manual

Page: 76 / 102

Configuration and setup
20222121A
75
transition speed is crossed (by more than 1 Knot higher or
lower speed).
−
Try the Dodge and U-turn function.
−
If a Non-Follow Up lever (or handheld remote) is connected,
test change of modes and verify port and starboard steering
commands of the lever.
−
Set waypoints into each navigator connected to the system,
and verify that the AP16 steers in NAV mode for each NAV
source.
−
Try the NoDrift mode.
−
Provide the owner with user training.
Providing user training
The user should be instructed in the "basic" operational
functions, such as:
−
Turning the system on and off
−
Changing modes. Explain briefly what takes place in the
different modes.
−
Regaining manual control from any mode. Point out in what
modes the helm is engaged by the autopilot and vice versa,
see page 13.
−
Taking command at an "inactive" station, if applicable.
−
Using the lock mode, how to lock/unlock and how to shut the
system down from a locked control unit, if applicable.
−
Use of the Non-Follow-up steering mode.
−
Use of a remote Non-Follow-up controller, if connected.
−
Changing course by STBD 1 , STBD 10 , PORT 1 and
PORT 10 buttons.
−
Stepping through the User Set-up Menu learning how to (and
why to) change the settings.
−
How to select alternative sources for heading (compass),
navigation (GPS), chartplotter, speed, depth etc. if available.
−
Understand the difference between NAV mode and NoDrift
mode.
−
Locating compasses and knowing to keep magnetic items
away.