Step 2 - Install the feed water adaptor valve
Locate Shut off valve.
Turn off the
COLD water shut off valve located
under the sink.
Warning:
Make sure you have turned
the water supply off before starting
any plumbing work.
Remove the original connection
from between the faucet and the cold
water shut off valve under the sink.
Connect the cold-water supply and
feed water adapter valve.
Tips
If the cold water valve outlet is 3/8”, install it as shown in Figure A.
If the cold water valve outlet is 1/2”, install it as shown in Figure B.
Step 3 - Install the faucet
Fixing to the Sink.
Try to install the
faucet on the sink surround if possible,
using one of the mounting holes already
available, remove the cover, make sure
you have clear access above and below.
If there are no additional holes available,
you will need to drill a suitable hole.
A secondary option would be to mount
the faucet directly into the countertop
next to the sink. Max.thickness 1.2 inches.
If you need to drill the countertop,
especially for granite, tile, or concrete,you
may need professional assistance.
Using a hammer and center punch, mark the hole. Drill a pilot hole first,
working up to
½
" (12.5mm) drill bit. Insert the faucet through the hole with the
top gasket in place and secure it with the locknut.
11
12
