Simpson
Water Saving Technology / Knowing Your Washing Machine
3
Lid lock is a safety feature in your washing machine
to ensure the lid is not opened during a stage in the
wash program when it would be hazardous for you
to do so. The lid will be locked when your washing
machine is spinning, shown by the padlock symbol
displayed on the screen.
Do not try to force
open the lid when it is locked.
You will be able to open the lid easily when the
padlock symbol on the screen disappears.
The washing machine can stop during rinse and spin
stages of a wash because of an out of balance
condition.
To let you know an out of balance interruption has
happened, the display will show “ ” in the digital
display.
Lid Lock Feature
Out of Balance Interruption
BEFORE you do your first wash, we suggest
you read the instructions on page 5 for
adding detergent, fabric softener or bleach.
Detergent Recommendation
The type and quantity of detergent will depend
on the type of fabric, load size, degree of soiling
and hardness of the water used.
Information on hardness of the water in your
area can be obtained from the relevant water
supply company, or from your local authority.
Follow the product manufacturers’ instructions
on quantities to use.
Water hardness is classified in so-called “degrees”
of hardness.
Use less detergent if:
you are washing a small load,
the laundry is lightly soiled,
large amounts of foam form during washing
How Does Eco Rinse Work ?
We recommend to use Eco rinse to maximise
water savings. Deep rinse is available for the times
it is needed, but deep rinse uses much more water
than Eco rinse.
When Eco rinse is used, rinse water is sprayed into
the washbowl in pulses. After each pulse the
washbowl will spin to remove detergent laden
water from the clothes.
The machine will go through a series of maximum
four pulse spray and short spin cycles in this
manner, depending on program selection, followed
by a final long spin that removes the water from
the clothes to complete the full wash program.
For deep rinse, water enter the machine to fill up
to the working level for the wash water level you
can not select. The washer agitates and finally
empties the rinse water through the drain hose.
Spin up Spin down
Final long spin
Pulse spray of rinse water
You must use a low sudsing detergent in this
new technology washer - for example, Cold
Power for Front Loaders and High Efficiency
Top Loaders or detergents labelled “Matic”.
Caution
Auto water level sensing
This product has auto load sensing feature to
select optimum amout of water to suit the cloth
load which might seem lower than conventional
machine. This is normal condition.
