Digital Display
Rinse Options
Information and Guidance Feature
FEATURES OF YOUR
WASHING MACHINE
What your washing machine
is doing
What this is telling you
and what to do to continue
Display will show ‘ ’
and you get 4 fast 'beeps' every 1 minute.
Display will show ‘ ’
and you get 4 fast 'beeps' every 1 minute.
Other codes
and you get 4 fast 'beeps' every 1 minute.
Time remaining is shown then ‘ ’
Indicates the machine has gone out of balance during
spin. Open lid, redistribute load and close lid.
Lid is in the open position.
Close the lid.
The machine is in pause mode.
Touch Start/Hold To Pause ( ) to continue.
The wash program has finished.
Start a new wash or switch off your machine.
The machine is informing you of a fault with the
washing machine which you need to address.
Refer to pages 18 & 19 for further information,
and what you should do before calling for service.
12
Simpson
Features of Your Washing Machine
Slecting the “
Rinse
” ICON, then touch the Modify
Option buttons ( , ) allows you to change the
rinse type. For most washes the machine
automatically selects “Eco Rinse” for you.
There are four rinses to choose from… Fast rinse,
Eco rinse, Deep rinse and Extra rinse.
Extra
Deep
Eco
Fast
Extra rinse uses maximum water rinsing, with
full water rinsing but executes “Deep rinse”
stage twice.
Deep rinse uses much more water, with full
water as wash water level selected.
Fast rinse uses water less than Eco rinse
approx. 20%. Suitable for 5 - 6 shirts .
Eco rinse is a spray rinse giving you maximum
water saving.
Eco Rinse and Fast Rinse cannot be
selected with Woollens and Bedding
program.
We strongly recommend you use Eco
rinse for your washes whenever you
can. There is considerable saving of
water when Eco is used instead of
Deep or Extra to rinse clothes.
Eco rinse is not designed to be used
with fabric softener. Select Deep or
Extra rinse if you are going to use
fabric softener. Deep rinse ensures the
fabric softener is correctly dispensed
and thoroughly removed from your
clothes during rinsing.
E17
LD
Display will show ‘ ’
and you get 4 slow 'beeps' every 4 minutes.
SP
Additional features on your washing machine are
described in this section.
The washing machine will give you information by
displaying codes in the Digital Display and use
‘beeping’ function (See table below).
The digital display will show the time in minutes (or
hours and minutes) to complete the wash program.
NOTE: This time does not include the time that the
washing machine will take to fill with water because of
the different water pressures in homes.
