20- ENG
This warranty does not cover the following:
machines used for rental purposes,
damage resulting from shipping (claims must be filed with freighter), accident,
abuse, act of God, misuse, or neglect. Neither is damage from repairs or altera-
tions performed by non-factory authorized personnel or failure to install and oper-
ate equipment according to the guidelines put forth in the instruction manual.
The manufacturer will not be liable to any persons for consequential damage, for
personal injury, or for commercial loss.
WARRANTY DOES NOT APPLY TO FAILURES DUE TO:
•
Freight damage
•
Damage due to chemical deterioration, scale build up, rust, corrosion or
thermal expansion
•
Freeze damage
•
Damage caused by parts or accessories not obtained from an authorized
dealer or not approved by the manufacturer.
•
Normal wear of moving parts or components affected by moving parts.
ENGINE
Covered by engine manufacturer warranty. See
engine manual.
HIGH PRESSURE PUMP (DEFECTS IN MATERIAL AND WORkMANSHIP)
Five (5) years from date of purchase.
FRAME (DEFECTS IN MATERIAL AND WORkMANSHIP)
One (1) year from date of purchase.
ACCESSORIES (DEFECTS IN MATERIAL AND WORkMANSHIP)
Includes nozzles, hoses, spray guns, wands, tires, feet
Ninety (90) days from date of purchase.
TROUBLE SHOOTING GUIDE
OPERATIONAL
ISSUE
POSSIBLE CAUSE
SOLUTION
Engine will
not start
(see
Engine
Owner's
Manual
for
further engine
troubleshooting)
No fuel
Add fresh fuel
Pressure builds up after
two pulls on the recoil
starter or after initial use
Squeeze gun trigger to relieve
pres sure
Choke lever in the "No
Choke" position
Move choke to the "Choke"
po si tion
Spark plug wire
not attached
Attach spark plug wire
No or low
pressure
(initial use)
Spray wand not in
high pressure
See
how to Use Spray
Wand
instructions in the
Operation
Section
Low water supply
Water supply must be at
least 5 gpm @ 20 PSI
Leak at high pressure
hose fitting
Repair leak. Apply sealant
tape if necessary
Nozzle obstructed
See
Nozzle Cleaning
instructions
in the
Maintenance
section
