11 - ENG
J. Pump Inlet
k. Quick Connect Nozzles
L. Nozzle holder
BASIC ELEMENTS OF AN ENGINE
Refer to the
Engine Owner's Manual
for location and operation of engine controls.
Choke Control:
Opens and closes carburetor choke valve.
Starter Grip:
Pulling starter grip operates recoil starter to crank engine.
Engine Switch:
Enables and disables ignition system.
ASSEMBLY INSTRUCTIONS (FIG. 2–4)
1. Locate and remove all loose parts from the carton.
2. Cut four corners of the carton from top to bottom and lay the panels flat.
3. Slide the handle assembly (G) onto the frame (H) and secure with saddle bolts
and knobs.
NOTICE:
Risk of personal injury. Avoid placing hands between handle and frame
when assembling to prevent pinching.
4. Remove the colored quick-connect nozzles (K) from the plastic bag and insert
them into correct grommet on the nozzle holder (L). Nozzles are color coded
to match colored nozzles on label.
k
L
G
h
2
2A
5. Connect wand (E) to gun (D). Tighten securely.
6. Attach high pressure hose (C) to gun (D). Tighten se cure ly.
E
4
D
C
3
D
NOTICE:
The engine is shipped without oil. Before starting engine, add the oil
provided. Damage to the engine will occur if the engine is run without oil, this
damage will not be covered under warranty.
NOTICE:
The high-pressure pump was filled with oil at the factory. Always check
oil level before using (refer to
Maintenance
for more information).
