Simpro QUIKSTAK QS10MM, User Manual

Page: 17 / 52

User Manual // Quikstak QS10MM
Original Instructions // English // v52.0 // April 2022 // Page
16
3. Operating Norms
The following operating norms must be observed for the safe use of the Quikstak.
• Before the stacker is deployed, a Standard Operating
Procedure must be formulated, taking consideration of the
actual conditions of use.
• The Standard Operating Procedure must be fully understood by
all staff using the Quikstak or working in proximity to it.
Standard Operating Procedure
• Only operators who have received formal training and may be
authorized to operate the stacker.
• All operators must read and understand this manual before
using the stacker.
• Never operate the stacker while tired, lacking in concentration
or while under the influence of drugs, alcohol or other
performance impariring substances.
• Operators must always wear safety shoes and suitable
protective clothing. Do not wear loose clothing, as it may be
caught, resulting in dangerous entrapment.
• Long hair should be tied back.
• Operator should carefully familiarise themselves with the stacker
and its operational characteristics before use.
Operators
• The stacker may only be used indoors on hard flat surfaces.
• The stacker must not be used to lift loads on ramps or sloping
ground.
• The operating surface should be in good condition, with a
minimum of traffic and marked zones for pedestrians.
• The operating area should be lit to a minimum of 200 lux.
• Operation in flammable, explosive, or corrosive (acidic or
alkaline) environments is forbidden.
• Never allow open flame, smoking or other ignition hazards in
proximity to the stacker and charger.
• Fire extinguishing appliances shall be available in the places
where stacker use and charging is carried out. The extinguishing
appliances shall comply with the requirements of extinguishing
fire of solid combustible matter and electric apparatus.
Operating Environment