Simpro Multi-Tip MT1600B, User Manual

Page: 37 / 48

User Manual | Simpro Multi-Tip®
Original Instructions | English | v35.0 | December 2019 | Page
36
4. Tie the machine into position using marked tie-down points and strops rated to at
least 1000kg. Ensure it is fastened against lateral forces from any direction.
To prevent oil leaks and damage to the guarding, do not lie the Multi-Tip over for
transport.
6.5 Storage
If the machine is not to be used for a period of two months or more, it should be stored in a
clean, dry place with good ventilation, at temperatures not below 0
℃
. Before placing the
machine into storage, carry out the following procedure:
1. Clean the machine thoroughly.
2. Carry out several full tipping cycles, then lower the cradle to the ground.
3. Apply a thin layer of silicone lubricant to exposed surfaces of moving parts.
4. Charge the battery (if fitted) and apply a suitable lubricant to the electrical contacts.
5. Turn the battery isolator switch to the OFF position.
6. Remove the key and store in a safe location.