manualshive.com logo in svg

SimpliSafe RI7GE910, Setup Manual, Page: 15 / 32

Share
Download
SimpliSafe RI7GE910 Setup Manual Download Page 15

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance

13

Install your Cameras

•  Slide the stand off the camera.

•  Insert the Micro-USB into the port on 

the back of the camera. Replace the 
stand, and plug the cord into a power 
outlet. 

•  Launch the SimpliSafe app on your 

smartphone to begin installation.

Port

Micro USB

Place your camera where a burglar is most likely to enter your 
home. Usually it’s a front or back door.

Thread the Micro-USB 
through the camera 
stand before inserting 
it into the camera port. 

With the Alarm Recording plan ($5/mo), cameras will capture a 
5 minute recording if your alarm is triggered and a 30 second 
recording when your system is armed or disarmed or there is a 
secret alert. 

When your camera is all set up, the top 
status light will be blue. A smaller red 
light beneath the status light is used at 
night to help illuminate your room.

To adjust camera settings like picture quality, privacy and volume, 
select “Cameras” in your app and tap the        icon.

Tip:

Tip:

Tip:

Tip:

Tip:

Summary of Contents for RI7GE910

































Reviews:

No comments