SimpliFire • SF-WM36, SF-WM58, SF-WM70, SF-WM94 Service Manual • 2040-908 Rev. D • 1/19
6
Wall
Masonry Anchors
Figure 21 (SF-WM36) Masonry Anchor Placement
Figure 25 (SF-WM36) Bracket Attachment
Wall Mount Bracket Installation
The wall mounting bracket can be installed on masonry
walls such as those constructed of brick or concrete,
or to framed walls constructed of wood or steel framing
sheathed with gypsum drywall, wood, etc. The method
used to mount the mounting bracket is different between
masonry walls and framed walls. Refer to the following
sections for more detail on the method applicable to this
installation.
Masonry Wall
• In the marked locations, drill 5/16 in. diameter x 2
in. deep holes. See Figure 21 (SF-WM36), Figure
22 (SF-WM58), Figure 23 (SF-WM70) or Figure 24
(SF-WM94).
• Insert the provided wall anchors into the holes.
• Gently tap the anchors with a hammer until they are
flush with the wall surface.
• With mounting hooks pointed up, attach the bracket
to the masonry anchors with 6 x 50 screws . See
Figure 25 (SF-WM36), Figure 26 (SF-WM58), Figure
27 (SF-WM70) or Figure 28 (SF-WM94).
WARNING! Risk of Damage or Personal Injury! Do
not use supplied masonry anchors on hollow walls,
sheathed with wood, sheetrock, drywall or other materi-
als.
Mounting Hooks
Point Up
Wall
Masonry Anchors
Figure 22 (SF-WM58) Masonry Anchor Placement
Wall
Masonry Anchors
Figure 23 (SF-WM70) Masonry Anchor Placement
Wall
Masonry Anchors
Figure 24 (SF-WM94) Masonry Anchor Placement
